www.tracopower.com page 1 features dc/dc converter tap series 15 watt models highest power density in 50 x 25 x 10 mm (2? x 1? x 0.4?) package wide 2 : 1 input range very high efficiency up to 87% input filter meets en 55022, class a and fcc, level a without external components shielded metal case with insulated baseplate industry standard pinout high reliability, mtbf > 1.2 mio. h 2 year product warranty the tap series is a range of high performance, isolated dc/dc- converter modules with highest power density. state of the art smd- technology guarantees a product with very high reliability. i/o-isolation of 1?500 vdc together with conducted noise compliance to en 55022- a and fcc, level a makes these converters the ideal product for communications, battery powered mobile equipments and distributed power system applications. ordercode input voltage range output voltage output current max. efficiency typ. tap 1210 3,3 vdc 2?400 ma 77 % tap 1211 5 vdc 2?000 ma 80 % tap 1212 9 ? 18 vdc 12 vdc 1?000 ma 83 % tap 1213 15 vdc 800 ma 83 % tap 1222 12 vdc 450 ma 83 % tap 1223 15 vdc 350 ma 83 % tap 2410 3,3 vdc 2?800 ma 79 % tap 2411 5 vdc 2?500 ma 82 % tap 2412 18 ? 36 vdc 12 vdc 1?250 ma 86 % tap 2413 15 vdc 1?000 ma 86 % tap 2422 12 vdc 600 ma 86 % tap 2423 15 vdc 500 ma 86 % tap 4811 5 vdc 2?500 ma 84 % tap 4812 12 vdc 1?250 ma 87 % tap 4813 36 ? 75 vdc 15 vdc 1?000 ma 87 % tap 4822 12 vdc 600 ma 87 % tap 4823 15 vdc 500 ma 87 %
www.tracopower.com page 2 all specifications valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. input specifications input current (no load) 12 vin models 30 ma typ. 24 vin models 20 ma typ. 48 vin models 10 ma typ. input current (full load) 12 vin models 1000 ma typ. 24 vin models 720 ma typ. 48 vin models 360 ma typ. surge voltage protection (1 sec max.) 12 vin models t.b.a. 24 vin models t.b.a. 48 vin models t.b.a. conducted noise (input) en 55022 level a, fcc part 15, level a output specifications voltage set accuracy 2 % regulation ? input variation vin min. to vin max. 0.5 % max. ? load variation 10 ? 90 % ? single output models 1.0 % max. ? dual output models balanced load 2.0 % max. ? dual output models unbalanced load 3.5 % max. ripple and noise (20 mhz bandwidth) 75 mvpk-pk max. temperature coefficient 0.05 % / c output current limitation >120% of iout max., constant current short circuit protection fol dback mode long term short circuit operation may cause damage to the converter. capacitive load ? single output models 200 f max. ? dual output models 50 f max. general specifications temperature ranges ? operating ? 25 c ... + 75 c (derating 3% /c above 60c) ? case temperature + 100 c max. ? storage ? 40 c ... + 125 c humidity (non condensing) 90 % rel h max. reliability, calculated mtbf (mil-hdbk-217 e) >1.2 mio. h @ + 25 c isolation voltage input/output ? 12/24 vdc models 750 vdc ? 48 vdc models 1?500 vdc isolation capacity input/output 2.2 nf typ isolation resistance input/output (500 vdc) > 1?000 m ohm switching frequency (fixed) 400 khz typ. (pulse width modulation pwm) safety standards ul 1950, en 60950, iec 60950 compliance up to 60 vdc input voltage (selv limit) safety approvals ul/cul file e188913 dc/dc converter tap series 15 watt
page 3 specifications can be changed without notice outline dimensions mm (inches) jenatschstrasse 1 ch-8002 zurich switzerland tel. +41-1284 2911 fax +41-1201 1168 e - mail: sales @ traco.ch internet: http://www.tracopower.com pin-out pin single dual 1 +vin (vcc) +vin (vcc) 2 ? vin (gnd) ? vin (gnd) 3 +vout +vout 4 no pin common 5 ? vout ? vout dc/dc converter tap series 15 watt rev. 06/00 physical specifications case material steel nickel-plated baseplate epoxy fr4 potting material silicon rubber tse (flammability to ul 94 v-0) weight 30 g (1.2 oz) soldering temperature max. 260 c / 10 sec. pin diameter ? 0.8 0.05 (0.03 0.002 ) 5.08 10.2 0.5 10 .16 20.32 25.4 0.5 10.8 0.5 4.5 50.8 0.5 15.2 0.5 20.32 insulated baseplate (2.0 0.02 ) (0.8) (0.6 0.02 ) (0.4 0.02 ) (0.2) (0.4) (0.4) (0.8) (1.0 0.02 ) 2.5 0.5 (0.1 0.02 ) (0.43 0.02 ) (0.18) bottom view 1 4 3 2 5 10 .16
|
